Battery Holder
A connector creates a removable electrical and mechanical link. It carries power, data, or both, while keeping the connection reliable across thousands of mate cycles.
Spring-loaded contacts wipe against mating pins as the connector closes, breaking through any oxidation. Housings keep the contacts aligned and offer strain relief, polarisation, and locking.
In plain terms
Lego studs for electricity. The right shape, on the right pitch, that lets two parts snap together repeatably.
Why designers use it
- Make a board serviceable — modules can be replaced without soldering.
- Carry USB, HDMI, or Ethernet according to a published standard.
- Quick-connect a battery, fan, or display.
- Provide a debug or programming interface the user never sees.
Best for
- Power feeds
- Data interfaces
- Modular assemblies
- Field-serviceable products
Key specifications
- Operating limits: Check the exact manufacturer's datasheet (A family name does not establish voltage, current, temperature or timing limits.)
- Pin assignment: Match the complete part and package code (A similar name or function does not guarantee the same wiring.)
- Mechanical fit: Use the exact package drawing (Check pad layout, dimensions and viewing direction before building.)
When not to use it
- Where size and cost dominate — a soldered wire might do.
- Where vibration would cause intermittent contact unless properly latched.
Common mistakes
- Picking a connector rated below the current it'll actually carry.
- Forgetting strain relief — the cable yanks the solder pads off.
- Leaving polarising features off the footprint and plugging in backwards.
Where you will find it
- The USB-C port has 24 pins arranged so the cable works either way around — the connector is doing the heavy lifting that lets a single cable carry power, video, audio, and data.
- Aircraft black boxes survive crashes partly because their connectors are mil-spec circular shells that mate under shock, vibration, and 1,100 °C fire — the recording is useless if the connector falls off.
- Hot-swap drive bays in data centres use specially staged pins so the ground and power contacts mate before the data lines — you can yank a drive out under load and the server keeps running.
A short history
Detachable electrical connections predate modern electronic boards. Harvey Hubbell patented an electrical power plug in 1904. Today's connector families solve many different mechanical and electrical problems, so a familiar shape or shared pitch is not enough to establish mating compatibility or signal assignments.